This Grizzly 6 Inch Jointer Review should give you all the information for you to know if a Grizzly jointer is good for you.
Grizzly actually makes 2 types of 6 inch wide jointers:
- One is a cheap, smaller and light mobile benchtop jointer – with a 28 1/2 inch long table, by 6 1/4 inches wide
- The other is a more heavy and expensive ground cast jointer (with a mobile base) – with a 46 inches long table, by 7-1/2 inches wide
The smaller one would suit a beginner, a woodworker on a budget, or someone without much room in their work space.
The bigger one would suit a regular woodworker, or someone looking to cut longer pieces of wood that the 46 inch long table allows.
If you’d like to read more about these Grizzly jointers, let’s get into it!
(*Friendly Disclosure – links to retailers or brands on this page may include affiliate links, and we may receive a commission when you purchase through these links)
Grizzly 6 Inch Benchtop Jointer
If you don’t have time to read the review and buyer’s guide, you can check out the jointer and price here…
View the Grizzly 6 Inch G0725 6 Inch On Amazon
Grizzly 6 Inch Jointer Review
Grizzly G0725 6 by 28-Inch Benchtop Jointer
What’s Good About It?
- Affordable
- Small and mobile compared to more expensive production type jointers – weighs only 80 lbs
- Motor is 1-1/2 HP, 110V, single-phase
- One good thing we will say about the Grizzly, like the Delta, is that it has a cast iron table and fence – unlike other benchtop jointers which are aluminium. This cast iron makes for a sturdier construction than the aluminium models.
- Table size is 28-1/2″ x 6-1/4″
- Fence size is 22-7/8″ x 4-5/16″
- Fence is adjustable and stops at 45°, 90° and 135°
- Cutterhead is a dual knife cutterhead
- Max cutterhead cuts per minute is 20,000 – at an RPM of 10,000
- Has a maximum depth of cut of 1/8″
What Could Be Improved?
- Maybe you have a preference for the Grizzly brand, but we do rate the Cutech jointer, and Delta jointer as better benchtop jointers in the 6 inch range – you might like to check them out.
- Dust port could be bigger – only 2.5 inches
- Fence is a little fiddly – but once you have it set its ok
What Else Might You Get With It?
- Separate planer
- Push Block pads
- Shop vac
- Mobile base would be optional
Where To Check It Out?
View the Grizzly 6 Inch G0725 6 Inch On Amazon
Grizzly G0654 Jointer, 6 x 46-Inch
What’s Good About It?
- You don’t need to buy a separate mobile base – it comes with one in-built, and also a kick stand
- Has a 1 HP, 110-volt, single-phase motor
- Table size is 7-1/2 x 46 inches – consider this when determining size of wood you can cut
- Maximum depth of cut is 1/8-inch
- Maximum rabbeting capacity is 1/2-inch
- Cutterhead diameter: is 2-1/2 inches
- Cutterhead knives are 3 HSS blades
- Cutterhead speed of 4800 RPM
- The height of the table from the floor in 33-3/8 inches
- Fence size is 4-1/2 inches high x 29-3/8 inches long
- Has an adjustable fences with stops at 45 degrees and 90 degrees
- Approximate shipping weight is 240 pounds
- Has a decent sized 4 inc h dust port
What Could Be Improved?
- No major drawbacks to this jointer apart from the price
What Else Might You Get With It?
- Shop Vac
- Separate Planer if you need it
Where To Check It Out?
View the Grizzly G0654 Jointer, 6 x 46-Inch On Amazon
Grizzly 6 Inch Jointer: Buyer’s Guide
What Is The Grizzly 6 Inch Jointer?
Benchtop Jointer (28.5 inch long table)
A cheap, mobile, 6 inch benchtop jointer with dual cutterhead, and cast iron table and fence.
Ground Cast Jointer (46 inch long table)
A more expensive, mobile base, 6 inch ground cast jointer with 3 knife cutterhead. Has a 46 inch long table for longer pieces of wood
Who Is The Grizzly 6 Inch Jointer For?
Benchtop Jointer (28.5 inch long table)
Those looking for a 6 inch benchtop jointer
Those looking for cast iron construction compared to aluminium
Those looking for a mobile benchtop jointer that doesnt take up too much space and is small enough to move around
Those looking for an affordable benchtop jointer
Ground Cast Jointer (46 inch long table)
Those looking to cut longer pieces of timber
Those looking for a ground cast jointer that has an in built mobile base
Who Is The Grizzly 6 Inch Jointer Not For?
Benchtop Jointer (28.5 inch long table)
Those looking for a jointer with a table bigger than 6 inches wide
Those looking for a large production level jointer
Those looking for a jointer with a helical cutterhead
Ground Cast Jointer (46 inch long table)
Those looking for a cheap 6 inch jointer
Those looking for a benchtop jointer
Those looking for a lightweight jointer
Grizzly 6 Inch Jointer – Bits & Accessories
Separate planer
Push Block pads
Shop vac
Mobile base would be optional
Grizzly 6 Inch Jointer: Resources
1. https://www.grizzly.com/
Friendly Disclaimers
Tooljuice.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
Amazon and the Amazon logo are trademarks of Amazon.com, Inc., or its affiliates.
Additionally, Tooljuice.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.