Best Dremel Bit For Grout Removal

We will keep this guide fairly short – because let’s face it, grout removal is not a complicated task.

As we’ve mentioned before, a Dremel rotary tool is very versatile, and if you have one, you can definitely use it to remove chipped, deteriorated or discoloured grout in between tiles.

To do this, you’ll want to use the best Dremel bit for grout removal.

We’ve listed below the best Dremel bits for grout removal, along with our opinion on the Dremel attachment for grout removal.

You can run your eyes over the list if you are short on time.

Otherwise, you might like to read the guide in full which should only take you a couple of minutes.

NOTE: a Dremel is a finishing electric or cordless tool for light and small tasks. If you are dealing with heavier duty grout removal, you might like to look at using an oscillating tool.

 

(*Friendly Disclosure – links to retailers or brands on this page may include affiliate links, and we may receive a commission when you purchase through these links)

 

Top Dremel Bit For Grout Removal List

 

Refer guide below for top Dremel bits for grout removal

 

Best Dremel Bit For Grout Removal: Reviews

 

569 1/16″ Carbide Grout Removal Bit

  • Designed to remove floor and wall grout
  • Made of carbide
  • 1/16 inch bit – use with a keyless chuck, 3 jaw chuck or a Collet 482 with 2 rings
  • Some people complain these bits may break too easy – but, you should have no issues if you don’t force pressure down on the bit

View the 569 1/16″ Carbide Grout Removal Bit on Amazon

 

570 1/8″ Carbide Grout Removal Bit

  • Designed to remove floor and wall grout
  • Made of carbide
  • 1/8 inch bit – use with a keyless chuck, 3 jaw chuck or a Collet 480 with 0 rings
  • Thicker than the 1/16 inch bit, so use this on thicker grout joints if the 1/16 inch bit isn’t thick enough
  • Some people complain these bits may break too easy – but, you should have no issues if you don’t force pressure down on the bit

View the 570 1/8″ Carbide Grout Removal Bit on Amazon

 

568 Grout Removal Attachment

In our opinion, this attachment is not needed to remove grout.

You will save money and do just as good a job using the Dremel tool and Dremel grout removal bits freehand.

The two main issues with this attachment are:

  • The attachment doesn’t do a good job of holding the bit steady, or centred
  • The attachment is made of weak plastic – it can wear out fairly quickly

 

Best Dremel Bit For Grout Removal: Buyer’s Guide & FAQ

 

What Is A Dremel Bit For Grout Removal?

A dremel bit used for grout removal is a carbide bit that sits in the collet or chuck in a Dremel rotary tool.

 

What Is A Dremel Bit Used For When Removing Grout?

A Dremel bit for grout removal is used to remove both wall and floor tile grout.

If the grout is deteriorating or dirty and needs to be removed to be replaced – you can remove it with a Dremel rotary tool, using a Dremel grout removal bit.

The bit rotates in the Dremel tool at speeds between 5,000 to 35,000 RPM (depending on Dremel tool you have), and breaks up the grout for removal.

 

Types of Dremel Grout Bits

Dremel only has two grout removal bits:

  • a 1/8 inch bit
  • a 1/16 inch bit

For thick grout joints, use the 1/8 inch bit as it’s thicker and slightly wider.

For thin joints, use the 1/16 inch bit.

 

How To Use A Dremel Bit For Grout Removal

A Dremel tool might be the only tool used for grout removal, but it’s common that some people use an oscillating tool and/or grout saw too.

1. Make sure your Dremel rotary tool is fitted with the right size collet for the bit you want to use (if you have a collet system Dremel)

2. Secure the bit in the Dremel

3. Set the speed you want to work at

4. Use the Dremel to remove the grout

5. Any spots you can’t get at with the Dremel, use a grout saw/manual grout remover to get into the space

6. For tough to remove grout, think about using an oscillating tool

 

Best Dremel Bit For Grout Removal: Resources

1. https://www.dremel.com/en/

 

 

Friendly Disclaimers 

 

Tooljuice.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.

Amazon and the Amazon logo are trademarks of Amazon.com, Inc., or its affiliates.

Additionally, Tooljuice.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.

Leave a Comment