Best Dremel Bit For Wood Carving & Engraving Wood

Dremel has a range of cutters and wheel points for rotary tool users looking to carve and engrave.

The best Dremel bit for wood carving and engraving wood will differ depending on:

  • if you are just looking to carry out detailed work
  • if you want to carry out other work like shaping, inlaying, hollowing, routing etc.

It’s also important whether you intend to carve and engrave on just soft woods, or both soft and hard woods.

Whatever work you intend to carry out, and regardless of the wood hardness, we’ve listed below all Dremel bits for wood carving and engraving, along with a description their intended use.

It should be easy for all woodworkers to identify the best Dremel bit for their wood carving & engraving by reading this short guide.

 

If you’re running a little short on time, you can check out the top rated Dremel bit for wood carving and engraving list immediately below.

Otherwise, you can read the guide and reviews in full.

 

Top Rated Dremel Bit For Wood Carving & Engraving Wood List

Dremel Bit For Wood Carving & Engraving WoodCommentsCheck Price
Dremel 689-01 11-Piece Rotary Tool Carving and Engraving KitBest Value Dremel Wood Carving & Engraving KitCheck Carving/Engraving Kit Price On Amazon

 

Best Dremel Bit For Wood Carving & Engraving Wood Reviews

 

Best Dremel Engraving Kit For Wood Carving & Engraving

  • Dremel 689-01 11-Piece Rotary Tool Carving and Engraving Kit
View On Amazon

We already identified this kit in our guide about Dremel Accessory Kits/Sets.

It is a great value for money kit for carvers and engravers.

What’s In The Kit?

  • Storage Box
  • Carving/Engraving: 6 Bits (including diamond bit)
  • Grinding/Sharpening: 4 Bits
  • Other: 1 Collet
  • TOTAL BITS: 11 Bits

Where To Check Out The Kit?

View the Dremel 689-01 11-Piece Rotary Tool Carving and Engraving Kit on Amazon

 

Best Dremel Engraver Bits For Wood Carving & Engraving

Tungsten Engraving Cutters

For detailing work like carving, engraving and routing.

Can be used on materials like wood, fiberglass, ceramics, jewelry, soft metals and more.

  • 105 Engraver Cutter
  • 110 Engraving Cutter
  • 112 Engraving Cutter

 

For detailing work like carving, engraving and routing.

Can be used on materials like wood, fiberglass, plastic and soft materials, but are not for use with hardened materials.

  • 106 Engraving Cutter
  • 107 Engraving Cutter
  • 108 Engraving Cutter
  • 109 Engraving Cutter
  • 111 Engraving Cutter
  • 113 Engraving Cutter

 

Diamond Wheel Points

For fine detail work, cutting, engraving, carving, touch-up and finishing.

For use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials.

  • 7103 Diamond Wheel Point
  • 7105 Diamond Wheel Point
  • 7120 Diamond Wheel Point
  • 7122 Diamond Wheel Point
  • 7123 Diamond Wheel Point
  • 7144 Diamond Wheel Point

View Dremel 11 Piece Engraving Kit On Amazon

 

Best Cutter Bits For Wood Carving & Engraving Wood

Diamond Cutter Bits

The following cutter bits are…

For fine detail work, cutting, engraving, carving, touch-up and finishing.

They can be used on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials

  • 7134 Diamond Wheel Point (diamond grit coated)
  • 7150 Diamond Wheel Points

 

Steel Cutter Bits

The following cutter bits are…

Steel cutters for use on wood, plastic and soft metals – especially on curved surfaces

They are ideal for shaping, hollowing, grooving, slotting, inlaying, and making tapered holes.

  • 100 High Speed Cutter
  • 114 High Speed Cutter
  • 116 High Speed Cutter
  • 117 High Speed Cutter
  • 118 High Speed Cutter
  • 121 High Speed Cutter
  • 125 High Speed Cutter
  • 134 High Speed Cutter
  • 144 High Speed Cutter
  • 190 High Speed Cutter
  • 191 High Speed Cutter
  • 192 High Speed Cutter (carving and engraving cutter)
  • 194 High Speed Cutter
  • 196 High Speed Cutter
  • 199 High Speed Cutter

 

The following cutter bits are…

Made from steel, and designed for use on wood, plastic and soft metals.

Can be used for shaping, hollowing and grooving + tapered holes.

  • 124 High Speed Cutter

 

The following cutter bits are…

Made from steel and for use on wood, plastic and soft metals.

Used for shaping, hollowing and grooving, and good for curved surfaces

  • 193 High Speed Cutter

 

The following cutter bits are…

For use on wood, fiberglass, ceramics, jewelry, soft metals and more.

Ideal for shaping, hollowing, grooving, slotting, inlaying and making tapered holes.

  • 115 High Speed Cutter

 

Tungsten Carbide Cutter Bits

The following cutter bits…

Shape, smooth or grind/remove material from hard woods, and other especially hard materials including hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics.

  • 9901 Tungsten Carbide Cutter
  • 9902 Tungsten Carbide Cutter
  • 9903 Tungsten Carbide Cutter
  • 9904 Tungsten Carbide Cutter
  • 9905 Tungsten Carbide Cutter
  • 9906 Tungsten Carbide Cutter
  • 9909 Tungsten Carbide Cutter
  • 9910 Tungsten Carbide Cutter
  • 9911 Tungsten Carbide Cutter

 

Structured Tooth Tungsten Carbide Cutter Bits

The following cutter bits…

Are for fast material removal of wood, and fiberglass, plastic, epoxy, rubber, laminates, particleboard and ceramic tile.

  • Structured Tooth Tungsten Carbide Cutter 9931
  • Structured Tooth Tungsten Carbide Cutter 9933
  • Structured Tooth Tungsten Carbide Cutter 9934
  • Structured Tooth Tungsten Carbide Cutter 9935
  • Structured Tooth Tungsten Carbide Cutter 9936

View Dremel 9933 Structured Tooth Bit On Amazon 

 

Best Dremel Bit For Wood Carving & Engraving Wood: Buyer’s Guide & FAQ

You can read our other guides on Dremel Accessories/BitsDremel Accessory Kits/Sets, and Dremel Attachments for further information on Dremel wood carving and engraving bits and attachments.

You can also read about the best Dremel tool for wood carvingengraving and woodworking.

 

Other Names For Dremel Wood Carving & Engraving Bits

  • Dremel High Speed Cutter Bits
  • Dremel Engraving Bits & Points
  • Rotary Tool Wood Cutter & Engraving Bits/Points

 

What Is A Dremel Bit For Wood Carving & Engraving Wood?

Unlikes a cut-off wheel for cutting wood, Dremel bits for carving and engraving wood are pointed for the detail nature of the work.

Instead of a wheel that cuts off wood, the carving/engraving bits cut into the wood to creates grooves and lines.

These bits sit in the collet or chuck system in the end of your Dremel rotary tool.

 

What Is A Dremel Bit Used For When Wood Carving & Engraving Wood?

Engraving Bits

These bits are used for fine detail work – cutting, engraving, carving, touch-up, finishing and routing.

They are made of both tungsten and diamond, so can be used on soft or hard woods.

 

Cutter Bits

Can be used for a whole range of activities like engraving and carving, but also shaping, hollowing, grooving, slotting, inlaying, making tapered holes and fast wood removal.

Made of diamond, steel, tungsten carbide, and tungsten carbide structured tooth.

The steel bits are better for soft woods, while the other bits can be used on soft or hard woods.

 

Types of Dremel Bits For Wood Carving & Engraving Wood

There are two types of Dremel bits for engraving and carving wood.

  • Engraving Bits which are mainly for detailing tasks like engraving and carving
  • Cutter Bits which can be used for engraving/carving, but also a range of other tasks like shaping and more

These different types of bits are made of a range of materials including steel, tungsten carbide, structured tooth tungsten carbide, tungsten and diamond.

Steel is the softest material for softer woods, whilst tungsten carbide and diamond are hard materials for the hardest woods.

The Dremel Engraver tool (not a rotary tool, but a specialised engraver tool) also has the:

  • 9924 Carbide Engraving Point, AND
  • 9929 Diamond Engraving Point

 

How To Choose A Dremel Bit For Wood Carving & Engraving Wood

  1. Check what size bit shanks your Dremel rotary tool accepts – get the proper size collet if you don’t have it
  2. Decide if you want a bit kit/set, or to buy individual bits
  3. List the wood cutting task/s you want to perform
  4. Buy the suitable bit kit or individual bit for your task/s by looking at what each bit type is designed for

 

Features To Look For In A Dremel Bit For Wood Carving & Engraving Wood

  • What material is the bit made out of (e.g. diamond, carbide, tungsten carbide or other? – this effects the hardness of the wood you ideally should use the bit on)
  • What is the bit designed for – what types of tasks (cutting soft, AND hard woods?), and to be used on what materials (just wood, or other materials like plastic, leather, metal etc.?)?
  • Is the bit just for engraving/carving, or can it be used for other wood related work like shaping and routing for example?
  • What is the shank diameter (determines what size collet you will need if you have a collet system on your Dremel tool)
  • What shape is the bit head? (effects the type of work you can do)

 

How To Use A Dremel Bit For Wood Carving & Engraving Wood

  1. Look at what sort of bit mechanism your rotary tool has – collet system, or chuck (3 jaw) system?
  2. If chuck, it should generally fit all bit and mandrel shank sizes
  3. If collet, look at the size of the bit shank or mandrel for the bit you want to purchase, and make sure you have the matching sized collet
  4. Secure the bit in the rotary tool
  5. Begin use

 

Best Dremel Bit For Wood Carving & Engraving Wood Resources

1. https://www.dremel.com/en/

 

“tooljuice.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com”

“Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com Inc., or its affiliates”

1 thought on “Best Dremel Bit For Wood Carving & Engraving Wood”

  1. I’m making napkin rings and using a Dremel, what bit would be the best to use for grinding out the hole, include pictures if possible

    Reply

Leave a Comment