Dremel has a few tools and bits which can be used to engrave, carve and etch into stones of differing hardnesses and types.
The two main ways you may choose to engrave on semi-precious stones and harder stone are:
With a Dremel rotary tool
OR with a Dremel Engraver tool
You can read more about these tools in our engraving, and stone carving guides.
Below we list the best Dremel bit for engraving stone with both types of tools – which should save you alot time sorting and reading through all the bit descriptions.
If you’re running a little short on time, you can check out the top rated Dremel bit for engraving stone immediately below.
Otherwise, you can read the guide and reviews in full.
(*Friendly Disclosure – links to retailers or brands on this page may include affiliate links, and we may receive a commission when you purchase through these links)
Top Dremel Bits For Engraving Stone List
Best Value Dremel Kit For Engraving Stone – Dremel 689-01 11-Piece Rotary Tool Carving and Engraving Kit (on Amazon)
Best Non Dremel Brand Cheap Bit Set For Engraving Stone – SE 82331TF 30-Piece Set of Titanium-Coated Diamond Burrs (on Amazon)
Best Dremel Bit For Engraving Stone: Reviews
Best Dremel Rotary Tool Bit Set For Engraving Stone
Dremel 689-01 11-Piece Rotary Tool Carving and Engraving Kit
We already reviewed this engraving set in our guide on Dremel bit sets.
However, when looking at this bit set specifically for engraving stone, you get:
A Storage box
Carving/Engraving Bits: 7103 5/64″ Diamond Wheel Point, 7134 5/64″ Diamond Carving Bit
Grinding/Sharpening Stones: 83142 9/32″ Grinding Stone, 83322 1/8″ Grinding Stone, 83702 1/8″ Grinding Stone, 84922 3/16″ Grinding Stone
Other Bits: 481 Collet
The carving/engraving bits will be good for detailed engraving, whilst the grinding stones are silicon carbide stones that can be used for grinding and etching on stones.
You also get other carving/engraving bits for softer materials included in the kit.
View the Dremel 689-01 11-Piece Rotary Tool Carving and Engraving Kit on Amazon
Best Dremel Rotary Tool Bit For Engraving Stone
The following rotary tool bits are…
For fine detail work, cutting, engraving, carving, touch-up and finishing.
You can use them on semi-precious stones and other hard stones
7103 Diamond Wheel Point
7105 Diamond Wheel Point
7120 Diamond Wheel Point
7122 Diamond Wheel Point
7123 Diamond Wheel Point
7144 Diamond Wheel Point
7134 Diamond Wheel Point
7150 Diamond Wheel Point
The following rotary tool bits are…
Designed to grind and etch stone, glass, ceramics, porcelain and non-ferrous metals.
They are ideal for sharpening, de-burring and general purpose grinding on harder materials
83322 Silicon Carbide Grinding Stone
83702 Silicon Carbide Grinding Stone
84922 Silicon Carbide Grinding Stone
83142 Silicon Carbide Grinding Stone
85422 Silicon Carbide Grinding Stone
Best Dremel Engraver Tool Bit For Engraving Stone
If you have a Dremel Engraver tool, the best bit for engraving stone is the:
Dremel 9929 Diamond Engraving Point.
This bit is designed for hard-surface engraving applications, and you can create finer lines or deeper grooves.
This bit does not usually come with the Dremel Engraver tool (only the carbide bit does), so it’s worth buying it as an optional extra if you are engraving on stone and other hard surfaces.
Best Non Dremel Rotary Tool Bits For Engraving Stone
SE 82331TF 30-Piece Set of Titanium-Coated Diamond Burrs
Another set which we have previously reviewed in our guide about Dremel & Non-Dremel brand accessory kits.
This rotary tool set is particularly cheap, and the bits can be used for engraving/carving and a number of other tasks on stone, rock carbide, gold, platinum, silver, metals, and most materials with a hard surface.
You get 30 titanium coated diamond burrs of different heads shapes – Ball, Cone, Rounded Cylinder, Flat Top Cylinder, Tapered, Needle Point.
Whilst probably not quite as high quality as the Dremel bits, this kit is still good value for money.
Best Dremel Bit For Engraving Stone: Buyer’s Guide & FAQ
You can read our other guides on Dremel Accessories/Bits, Dremel Accessory Kits/Sets, and Dremel Attachments for further information on Dremel stone engraving and attachments.
What Is A Dremel Bit For Engraving Stone?
A Dremel bit for engraving stone will sit in the collet or chuck system in the end of your Dremel rotary tool.
Stone engraving and etching bits are hard bits (e.g. diamond coated bits. and silicon carbide stones) that are designed to work with hard surfaces.
Types of Dremel Bits For Engraving Stone
There are rotary tool bits, and the Dremel Engraver tool bit.
There are also Non-Dremel brand bits.
Rotary tool bits include:
Dremel Diamond Wheel Engraving Bits
Dremel Silicon Carbide Grinding Stones
Non-Dremel Brand Titanium Coated Diamond Burrs
Dremel Engraving Tool bits include:
Dremel Diamond Engraving Point
What Is A Dremel Bit Used For When Engraving Stone?
Rotary Tool Diamond Wheel Engraving Bits
For fine detail work, cutting, engraving, carving, touch-up and finishing.
You can use them on semi-precious stones and other hard stones.
Rotary Tool Silicon Carbide Grinding Stones
Designed to grind and etch stone, glass, ceramics, porcelain and non-ferrous metals.
They are ideal for sharpening, de-burring and general purpose grinding on harder materials
Dremel Engraving Tool Diamond Engraving Point
Designed for hard-surface engraving applications, and you can create finer lines or deeper grooves with it depending on how hard you press down into the stone.
How To Choose A Dremel Bit For Engraving Stone
1) Choose whether you want to use a Dremel rotary tool of the Dremel Engraver tool
2) Check what size bit shanks your Dremel rotary tool accepts – get the proper size collet if you don’t have it. If you have the 3 jaw chuck system, the bit should fit regardless of the shank size
3) Decide if you want a bit kit/set, or to buy individual bits
4) List the stone work tasks you want to perform – just engraving, or grinding/smoothing and etching as well?
5) Buy the suitable bit kit or individual bit for your task/s by looking at what each bit type is designed for
Features To Look For In A Dremel Bit For Engraving Stone
What material is the bit made out of (e.g. diamond, silicon carbide, titanium?) – this effects sometimes the hardness of stone you can engrave
What is the bit designed for – just engraving stone? Just smoothing and etching stone? Can you use it on other materials if you plan to work on more than just stone?
What is the shank diameter (determines what size collet you will need if you have a collet system on your Dremel tool)
What shape is the bit head? (effects the type of work you can do)
Is the bit Dremel, or Non Dremel brand? Dremel brand bits are generally high quality, and obviously designed to fit with Dremel tools
How To Use A Dremel Bit For Engraving Stone
1) Look at what sort of bit mechanism your rotary tool has – collet system, or chuck (3 jaw) system? If Dremel engraver tool, just decide if you want the carbide or diamond bit equipped in the tool
2) On the rotary tool, If chuck system, it should generally fit all bit and mandrel shank sizes
3) If collet, look at the size of the bit shank or mandrel for the bit you want to purchase, and make sure you have the matching sized collet
4) Secure the bit in the rotary tool
5) Begin engraving on stone, or etching if using a grinding stone
Best Dremel Bit For Engraving Stone: Resources
1. https://www.dremel.com/en/
Friendly Disclaimers
Tooljuice.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
Amazon and the Amazon logo are trademarks of Amazon.com, Inc., or its affiliates.
Additionally, Tooljuice.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.