The best Dremel attachments will vary depending on the tasks the Dremel tool user wants to perform.
Some Dremel attachments might be good for a wider range of tasks, whilst others might be for one specialised use.
Below is a list of some of the most popular Dremel attachments, and attachments that might be for specific uses.
We’ve also include what might be useful buyer’s information for Dremel attachments.
(*Friendly Disclosure – links to retailers or brands on this page may include affiliate links, and we may receive a commission when you purchase through these links)
Top Rated Dremel Attachments List
Most Popular & Commonly Used Dremel Attachments
A few of the most popular attachments might be:
- Dremel Flex Shaft Attachment (on Amazon)
- Dremel Keyless Chuck (on Amazon) (some consider the chuck an accessory, and not an attachment)
Best Dremel Attachment For Tool Free Bit Changes
Dremel 4486 MultiPro Keyless Chuck (on Amazon) – a keyless chuck for quicker and easier bit changing
Best Dremel Attachment For Drilling & Holding Your Dremel Tool
Dremel 220-01 Rotary Tool Work Station (on Amazon)
Best Dremel Attachment For Detail & Precision Tasks Like Carving, Engraving + More
Dremel 225-01 Flex Shaft Attachment (on Amazon)
Best Dremel Attachment For Tight Spaces & Right Angle Cutting/Grinding
Dremel 575 Right Angle Attachment for Rotary Tool (on Amazon)
Best Dremel Attachment For Clamping Work Material
Dremel 2500-01 Rotary Tool Multi-Vise (on Amazon)
Best Dremel Attachment For Sharpening Outdoor Tool Blades & Chains
Dremel A679-02 Attachment Kit for Sharpening Outdoor Gardening Tools (on Amazon)
Best Dremel Attachment For Plunge Routing
Dremel 335-01 Plunge Router Attachment (on Amazon)
Best Dremel Attachments Reviews
Dremel 4486 MultiPro Keyless Chuck
The Keyless chuck is fairly simple – it is a quick change attachment that allows you to change bits without having to use a wrench to tighten or loosen the collet.
It also eliminates the need for you to change collet sizes for bits that have different shank sizes.
Dremel collet sizes range from 1/8, 3/32. 1/16, 1/32 inch for both the standard and EZ collet sizes (note: EZ change collets are NOT compatible with the 225 flex shaft attachment and the 575 right angle attachment).
The difference between the Keyless Chuck and the EZ Twist Cap, is that the EZ Twist Cap comes with an in-built wrench for tool free bit change, but you’ll still need to change the collet.
Who Is This Dremel Attachment For?
Those who need to change bits often, and different sized bits often
Those who want tool-less bit changing that is quick
Those using bits with 1/32″ – 1/8″ shanks
Those who don’t want to be changing the collet size frequently
Who Is This Dremel Attachment Not For?
Those who use the same bits regularly
Those who are ok with using a wrench to change collets or bits
Those with non-compatible Dremel models
What’s Good About It?
Don’t need the wrench or any tools to change bits – quick and simple bit changing
Very affordable
Fits all accessory bits with 1/32″ to 1/8″ shanks, use with rotary tool models 4000, 400, 3000, 398, 395, 300, 285, 275, 200, 100, 8220, 8200, 800, 780, 770, 7700, 750, 8050…Also use with Dremel attachments 212, 225, and 575. Also fits any other Dremel model that specifically says it works with this attachment in the product description.
What’s Not So Great?
Although Some people find that it doesn’t fit some smaller models like the Dremel 200 – check with Dremel before purchasing if unsure
What Else Do You Need To Use This Dremel Attachment?
A compatible Dremel tool model
Where Can I Check Out This Dremel Attachment?
Dremel 225-01 Flex Shaft Attachment
Designed to give you comfort, control and precision on detail orientated tasks with a shaft that is flexible, and a lightweight hand piece that you hold like a pen.
NOTE: you won’t need this attachment if you are using the Dremel Forti-Flex which comes with an in-built flex shaft.
Who Is This Dremel Attachment For?
Those performing task that require higher degrees of detail like engraving, carving etc.
Those who want a hand piece they can grip like a pen
Those who want an attachment that allows you to get into tight spots and hold the hand piece at tight angles
Who Is This Dremel Attachment Not For?
Those who are OK with holding the main tool unit to perform their tasks
What’s Good About It?
Very affordable
Very easy and quick to attach to your Dremel tool
Lightweight hand piece you can grip like a pen
36-inch shaft length
Has up to a 5″ shaft bend radius
Integrated shaft lock button – for easy accessory changes
Accepts up to 1/8″ shank accessories, and works with collet system and the Dremel chuck
Fits Dremel Models: 4200, 4000, 400, 3000, 300, 398, 395, 285, 275, 200, 100, 8220, 8200, 8100, 800, 770. Also fits any other Dremel model that specifically says it works with this attachment in the product description.
What’s Not So Great?
Not a big deal – but requires lubrication before use
End that attaches to the Dremel can heat up after around half hour of use
Helps if you have a hook to hold up the shaft, but not necessary
What Else Do You Need To Use This Dremel Attachment?
Compatible Dremel model
Where Can I Check Out This Dremel Attachment?
Dremel 220-01 Rotary Tool Work Station & Drill Press
The Dremel Workstation is an all-in-one accessory (drill press, tool holder and flex shaft holder) for the Dremel range of rotary tools
It can be used for a range of uses and tasks – mainly drilling.
Beyond drilling, it can also be used as a tool holder and flex shaft holder for things like cutting, grinding, sanding, polishing and more.
It might mainly be for smaller and lighter tasks.
Who Is This Dremel Attachment For?
Those who want a drill press
Those who an attachment to hold their tool stationary while they polish, sand, grind, cut
Those who want a workstation with adjustable height
Those who want a workstation with storage area for bits and parts
It really would suit hobbyists, arts & crafters, and those looking for a workstation for light and small projects.
Who Is This Dremel Attachment Not For?
Those who want to use their Dremel free hand (not recommended for drilling with Dremel bits)
Those with non-compatible Dremel models
Those who want a heavier duty workstation, such as a fully metal drill press
Those who want an ultra precise and straight drilling tool
What’s Good About It?
Well built for smaller and hobby type jobs – precision work in plastic, light wood, and light thin metal etc.
Articulating Drill Press- drills perpendicular and angled holes in 15-degree increments, up to 90 degrees horizontal
Drill/penetration depth of 2 inches
Tool Holder – holds Tool at 90 degrees horizontal for tasks such as polishing metal objects, sanding different shapes and grinding metal pieces
The 90 degree horizontal tool holding position is for tasks like polishing metal objects, sanding different shapes and grinding metal pieces
Will hold your tool in place for a range of activities such as drilling, sanding, buffing/polishing, sanding and more
Telescopic Height Adjustment – to any height between 16 and 29 Inches,
Storage Area – crow’s nest provides on-board storage for drill bits, wrenches, and other Dremel accessories
Cord Management Clips – for safe storage of power cords,
Sturdy Metal Base with 4 Clamping Points – to securely hold the station
Inch and metric marking on base for accurate drilling of workpiece, and also depth markings with depth stop
Product dimensions are 6″ wide x 6″ long x 12″ tall/high
Weighs 11.92 lbs
Fits some compatible Dremel Rotary tools (read the product description for confirmation)
Includes: Attachment, mounting wrench, and instructions
What’s Not So Great?
Made of plastic and metal – all metal would be stronger (but, in fairness, this is supposed to be a cheap option more for crafters)
Not built for heavier jobs – made of plastic and has some flex
Not the most accurate or precise drill press – won’t drill perfectly straight holes all the time
Does not come with hold down clamps for objects you are working on, BUT Dremel does advise how to make your own hold down clamps on owners manual page 8.
What Else Do You Need To Use This Dremel Attachment?
Compatible Dremel tool
Any other bits you need for the tasks you want to perform
Where Can I Check Out This Dremel Attachment?
View the Dremel 220-01 Rotary Tool Work Station on Amazon
Dremel 4485 Quick Change Collet Nut Kit
The Quick Change Collet Nut Kit isn’t so much an attachment, but a kit of collet nuts (of different sizes) to accept all types of Dremel accessories/bits.
You would get this kit if you don’t plan on buying the Keyless Chuck, and you want to still use a wide range of accessories/bits.
It comes with 1 Collet and nuts for 1/8, 3/32, 1/16, and 1 32″ bits.
They are compatible with the following models – 4000, 400, 3000, 398, 395, 300, 285, 275, 200, 100, 8200, 800, 780, 770, 7700, 750 + any model that says they accept these sizes of collet nuts.
NOTE: these collet nuts and collet are not the EZ change collets.
Where Can I Check Out This Quick Change Collet Nut Kit?
View the Dremel 4485 Quick Change Collet Nut Kit on Amazon
Dremel 575 Right Angle Attachment for Rotary Tool
Turns your Dremel into a right angle tool – good for getting into tight places and for cutting perpendicular to surfaces (at a right angle).
Who Is This Dremel Attachment For?
People who need to get into tight spots their Dremel model is too large to fit in – gives you more reach with your tool
People who need to work at right angles to a surface
Who Is This Dremel Attachment Not For?
People who primarily work parallel to a surface
People who have no issues working with the Dremel tool as it is
What’s Good About It?
Coupling system allows you to rotate the right angle drill attachment on your tool to 12 different positions
Load rating of 180 lbs.
Gives you extra reach on your Dremel
Enables you to get into tight spaces
Makes working at right angles to a surface much easier
Very easy to attach to your tool
What’s Not So Great?
Not a heavy duty attachment – isn’t the strongest built attachment going around – but fine for lighter jobs
Can vibrate at highest Dremel speed settings
What Else Do You Need To Use This Dremel Attachment?
Compatible Dremel model tool
Where Can I Check Out This Dremel Attachment?
Dremel 2500-01 Rotary Tool Multi-Vise
For securing materials you are working on, or for freeing a hand that might be holding material you are working on.
Who Is This Dremel Attachment For?
Those who want to secure material they are working on
Those who frequently hold material when working on it, and want an attachment to hold the material instead to have both hands free
Who Is This Dremel Attachment Not For?
Those who are OK with holding and securing work material themselves
What’s Good About It?
Rotates 360°, and tilts 50°. You can lock the workpiece in any rotated or tilted position!
Clamps to any work surface up to 2-1/2″ thick
Clamp pieces are cushioned and won’t mark your material
Removable clamping jaws create a stand-alone bar clamp
Tool holder turns Dremel rotary tools into a stationary sander, grinder or polisher
Comes with vice head, tool holder, and adjustable base
What’s Not So Great?
Clamp material is plastic – this can be an issue when either the material you are working on or the tool heats up
Not the strongest vice/clamp on the market for heavy duty tasks – but great for finishing tasks – which is what Dremel rotary tools are designed for
What Else Do You Need To Use This Dremel Attachment?
Compatible Dremel model
Where Can I Check Out This Dremel Attachment?
Dremel A679-02 Attachment Kit for Sharpening Outdoor Gardening Tools
For sharpening lawn mower blades, garden tool blades (shears, hoes, and shovels + more) and chainsaws.
Who Is This Dremel Attachment For?
Those who want an outdoor tool sharpening kit – lawn mowers, garden tools, chainsaws.
Who Is This Dremel Attachment Not For?
Those who are OK using the regular Dremel grinding stones to sharpen their outdoor tool blades
What’s Good About It?
Makes it simple to sharpen outdoor tool blades
Comes with Garden tool sharpening attachment, Lawn mower sharpening attachment, Chain saw sharpening attachment, Gauge, Spacers, Instruction Manual, Wrench, 4 Sharpening stones: 453, 454, 455 and 932
Compatible with models 4200, 4000, 400, 3000, 300, 398, 395, 285, 275, 200, 100, 8220, 8200, 8100, 800, 770 + any other model that says its compatible with this attachment
What’s Not So Great?
Plastic guides are a bit flimsy and low quality
Good for general sharpening – if blades are really blunt, you might be better off replacing them
What Else Do You Need To Use This Dremel Attachment?
A Dremel rotary tool
Where Can I Check Out This Dremel Attachment?
Dremel 335-01 Plunge Router Attachment
Attachment that turns your Dremel rotary tool into a small/light cutting plunge router.
Who Is This Dremel Attachment For?
Those who need to perform router cutting – straight, parallel, edge and circle cutting
Those who need to create decorative edges, straight slots or rout freehand
Those who want to start their cut in the middle of your workpiece
Those who want to make inlays in furniture, musical instruments and wood crafts
Who Is This Dremel Attachment Not For?
Those who want to perform regular cutting with a Dremel cutting wheel
Those who want to perform heavy duty plunge routing with a bigger plunge routing tool
What’s Good About It?
Plunge lock-in handle
Two depth stops with quick release for rapid adjustment of routing depth
Clear base allows greater visibility of the work surface
Depth guide includes english and metric markings
On board storage for router bits and wrench
Fits with models 275, 285, 395, 398; 100, 200, 300 and 400 Series; 3000, 4000, 4200, 8200 and 8220 + other models that state they are compatible with this attachment.
Includes plunge router attachment, edge guide, circle cutting guide, mounting wrench, manual
What’s Not So Great?
This is a very small plunge routing tool – not for the biggest or most heavy duty routing cuts
Plastic and metal attachments – plastic is strong enough for small cuts, but not for heavy duty routing
What Else Do You Need To Use This Dremel Attachment?
Compatible Dremel tool
Where Can I Check Out This Dremel Attachment?
Other Dremel Attachments
Dremel Mini Saw: 670
For making 1/4 inch thick; straight, perpendicular cuts in wood. Turns your Dremel into a mini circular saw.
Dremel Shaper/Router Table: 231
Bench mounted wood shaper, adjustable fence and a 8-Inch x 6-Inch work table, can slot, groove, sand and trim edges of wood.
Dremel Detailer’s Grip: A577
Specially designed grip for detailed based tasks like engraving, carving and more. Comes with an engraving bit and stencil.
Dremel Sanding/Grinding Guide: A576
Mainly for sanding and grinding. Offers stability during edge sanding and sharpening, and has depth control.
Dremel Shield Kit: A550
Quite simple – designed to deflect debris and sparks from hitting the user of the Dremel tool.
Dremel Multipurpose Cutting Kit: 565
Good for drywall cutouts – can set depth of cut, but can also cut wood, ceiling tiles, laminate, fiberglass, plastic and vinyl siding with this attachment. Comes with cutting bits.
Dremel Tile Cutting Kit: 566
For cutting wall tiles, but not one of the most commonly purchased attachments.
Dremel Grout Removal: 568 Attachment
For removing wall and floor grout – comes with carbide grout removal bit.
Dremel Circle Cutter and Straight Edge Guide: 678-01
For cutting circular holes for projects such as canned lighting, cars speakers, woodworking projects and more.
Dremel Dust Blower: 490
Blows dust away from the work material – suits tasks like sanding, engraving and carving.
Best Dremel Attachments: Buyer’s Guide & FAQ
Dremel Attachment Information Guide
In a separate guide on Dremel attachments, we outline:
– What Dremel attachments are
– What some of the different Dremel attachments are used for
– What the most popular Dremel attachments are
How To Choose A Dremel Attachment
Read the product description for what the attachment is designed to do.
Then, use the attachment with a compatible Dremel tool – the tool product description also usually identifies what attachments it’s compatible with.
A Note On Dremel Attachment Compatibility With Dremel Tools
Always check the compatibility of Dremel attachments with specific tools before purchase, and make sure the Dremel model hasn’t changed attachment thread sizes since it was first designed.
When Dremel introduces a new rotary tool model like the Dremel 4300 (introduced in December 2016) – it takes them some time to update compatibility descriptions with different attachments, accessories/bits, and parts.
In regards to the Dremel 4300 in particular, Dremel says “[The Dremel 4300 is] compatible with all Dremel rotary tool attachments and accessories (*some applications require the use of a collet system, included in kit)”
Also, it appears Dremel may have changed the thread size of the Dremel 200 recently (as of January 2017). This looks to have impacted it’s compatibility with the Dremel Keyless Chuck.
If you are unsure before purchasing a Dremel extra, read the product descriptions provided by Dremel, and/or contact Dremel to confirm compatibility.
More Information On Dremel Attachments
This guide contains some more information on Dremel bits and accessories.
Friendly Disclaimers
Tooljuice.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
Amazon and the Amazon logo are trademarks of Amazon.com, Inc., or its affiliates.
Additionally, Tooljuice.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.