WEN 2305 vs 2307 vs 23103 vs 23190: Comparison

 

Below, we compare the WEN 2305 vs 2307 vs 23103 vs 23190 models.

We outline the main differences and similarities of each one, along with the main features.

We also consider which one might be better to get.

 

(*Friendly Disclosure – links to retailers or brands on this page may include affiliate links, and we may receive a commission when you purchase through these links)

 

WEN 2305, 2307, 23103, & 23190

If you prefer, you can go straight to viewing each model here before viewing the information in the guide below:

WEN 2305 (on Amazon)

WEN 2307 (on Amazon)

WEN 23103 (on Amazon)

WEN 23190 (on Amazon) 

 

WEN 2305 vs 2307 vs 23103 vs 23190: Which To Get?

Our personal choice would be between the 2305 and the 23190

The 2305 is generally the cheaper tool kit

Although it might be more expensive, the 23190 offers higher tool amperage, a greater tool speed range (in RPMs) as well as a higher maximum speed, and the standard kit comes with a greater number of accessories

 

WEN 2305 vs 2307 vs 23103 vs 23190: Main Differences

WEN 2305 vs 2307

There might be three main differences between these two products:

– The 2305 comes with a flex shaft attachment (that the 2307 doesn’t)

The flex shaft attachment is held by the user (instead of holding the tool), and it is used for precision and detailed works 

 

– The 2305 comes with a carry case (that the 2307 doesn’t)

 

– The 2307 comes with more accessories (100 accessories vs 80 accessories)

 

What’s Different With The 23103 Compared To The 2305 & 2307 Models?

Some of the main differences are:

– Speed

The 2305 and 2307 models can operate between 8,000 to 30,000 RPM, and the 23103 model at 10,000 to 32,000 RPM

 

– Tool Weight

The 23103 is slightly heavier at 1.5 lbs, compared to the 2305 and 2307 at 1.1lbs

 

– Carry Case Design

The carry case design has changed

 

What’s Different With The 23190 Compared To The 23103, 2305 & 2307 Models?

A few key differences are:

– Amps

It’s the highest Amperage tool, at 1.3 Amps

The other tools are all 1 Amp

 

– Speed

It has the greatest range of speeds of all the tools, ranging from 8,000 to 35,000 RPM

 

– Handle

Comes with a specially designed ‘steady grip’ handle that the other tools don’t

 

– Number Of Accessories

The standard kit it comes with comes with the most accessories of all the standard kits

 

– Price

This obviously depends on where you buy the tool from, but, at the time we looked, the 23190 was the highest priced tool

 

Other Differences

Obviously, accessory and attachment inclusions in the tools kits, as well as the price might differ between the different tool kits.

Check these potential differences before purchasing, as they can change.

 

WEN 2305 vs 2307 vs 23103 vs 23190: Main Features

WEN 2305

An electric/corded rotary tool

Has a 1 AMP motor

Is rated 120V, 60Hz, AC 

Lightweight tool at 1.1 lbs (according to user manual)

A variable speed tool with speeds from 8,000 to 30,000 RPM – adjustable with the speed dial

Uses a spindle lock for bit changes – has 2.3mm & 3.2mm collets

There’s a hanger loop on the tool for hanging

For activities like cutting, sanding, polishing, shaping, drilling, deburring, grinding and more

Can be used with a flex shaft attachment for detail and precision orientated tasks – flex shaft may come in the kit

Comes with a carry case in the kit

Comes in a kit with with accessories for different activities (make sure to check the accessories prior to buying)

Has a limited warranty – check the warranty conditions prior to buying

 

WEN 2307

Essentially the same tool as the 2305 model

Refer to the differences between the 2305 and 2307 above in this guide

 

WEN 23103

A corded/electric rotary tool

Has a 1 AMP motor

Is 120 volts

Lightweight tool at 1.5 lbs 

Variable speed – can operate between 10,000 to 32,000 RPM

Has a hanger loop on the tool so you can hang it

Can be used for cutting, sanding, grinding, polishing, drilling, deburring, shaping, and more

Comes in a kit with 100 accessories (make sure to check the accessories, and what they can be used for prior to purchasing)

Separate to the accessories, it comes with a 1/8-inch collet, a 3/32-inch collet

Comes with a flex shaft attachment – for detailed work and precision. This flex shaft attachment is 3 feet long in length

Comes with a carry case

Has a limited warranty – check the warranty conditions prior to buying

 

WEN 23190

A corded/electric rotary tool

Has a 1.3 Amp motor

Is 120 volts

Lightweight tool at 1.3 lbs 

Variable speed – can operate between 8,000 to 35,000 RPM

Tool has a ‘steady grip’ handle which is removable

Can be used to carve, cut, grind, deburr, engrave, shape, drill, polish, and more

Collets range in size from 1/32 of an inch to 1/8 of an inch in size

Includes a carry case

Includes 190 accessories in the kit

Comes with a flex shaft attachment

Comes with a carry case

Has a limited warranty – check the warranty conditions prior to buying

 

WEN vs Dremel Rotary Tools

We put together a separate guide comparing the WEN vs Dremel brand rotary tools.

 

 

 

Friendly Disclaimers 

 

Tooljuice.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.

Amazon and the Amazon logo are trademarks of Amazon.com, Inc., or its affiliates.

Additionally, Tooljuice.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.

 

Leave a Comment