Dremel Ultra Saw Review

 

In the market for a miniature circular saw that can do cutting, grinding and surface prep?

If so, you’ll want to check out this useful Dremel Ultra Saw Review.

We provide a summary of who this saw might be for, list it’s best features and drawbacks, and provide a quick buyer’s guide with extra information on this tool.

Sound good? Let’s get into it!

 

(*Friendly Disclosure – links to retailers or brands on this page may include affiliate links, and we may receive a commission when you purchase through these links)

 

Dremel Ultra Saw Review & Buyer’s Guide

 

Dremel Ultra Saw Summary – Should You Get It?

  • The Dremel Ultra Saw is best suited to people who want an miniature circular saw in the range of 7.5/8 Amps and 13,000 RPM, for rip cutting, flush cutting, plunge cutting, grinding and surface preparation
  • It is also for people who want a more powerful and durable Dremel circular saw than the Saw Max
  • It is mainly for smaller, lighter and more detail work – not heavy, deep work
  • One of the main limitations of the saw is it’s shallow cutting depth – at 3/4 of an inch. It is also not perfect for flush cutting

View the Dremel Ultra Saw on Amazon

Other accessories and blades you might get with the Ultra Saw are:

Dremel US700 Ultra-Saw 6-Piece Cutting Wheel Kit (on Amazon)

Dremel US540-01 Ultra-Saw 3.5-Inch Tile Diamond Blade (on Amazon)

Dremel Saw-Max SM840 Miter Cutting Guide (on Amazon)

 

Dremel Ultra Saw: Review

View On Amazon

Features

  • An 8 Amp, 120 Volt miniature circular saw
  • A 3 in 1 tool for cutting, grinding and surface preparation
  • Has a single speed of 13,000 RPM
  • Weighs approximately 10 lbs
  • Is approximately 13 inches in length
  • Has a metal foot and guard to resist sharp off cuts and heat
  • Has a 7 foot cord length
  • Has a spindle lock
  • Has a 0 degree bevel capacity
  • Has 3.5 to 4 inch cutting and grinding wheels
  • Has a drivetrain that lasts 3 x longer than the Saw Max
  • The US40 kit comes with the following accessories – US500 4 Inch Carbide Wood Cutting Wheel, US510 3.5 Inch Metal Cutting Wheel (x2), US520 3.5-Inch Masonry Cutting Wheel, US600 4 Inch Carbide Wood Flush Cutting Wheel. It also comes with a wrench

Drawbacks

  • For lighter and more detail work – not for heavy work
  • The Dremel masonry blades don’t last a long time. You may have to purchase more durable diamond blades
  • Only cuts 3/4 of an inch in depth, and struggles with flush cutting sometimes
  • The saw body can get quite hot after extended use

View the Dremel Ultra Saw on Amazon

 

Dremel Ultra Saw: Buyer’s Guide

What Is The Dremel Ultra Saw?

It’s a miniature circular saw.

 

What Can You Use The Dremel Ultra Saw For?

Rip Cutting – through wood, plastic, metal, tile, masonry and more

Flush Cutting – For cutting baseboards for flooring installation for example, you would need a tool that allows for flush cutting. By turning the Dremel Ultra-Saw sideways and using the US600 flush cut blade, you can make flush cuts into soft and hard wood, plywood, composites, laminate flooring, drywall, PVC and plastic.

Plunge Cutting – cutting directly into the center of a board without drilling pilot holes for the blade. Common applications include making a rectangular hole cut out for a floor vent. The Dremel Ultra-Saw features adjustable depth control to help guide users in the depth of the plunge.

Grinding

Surface preparation tasks like removing paint, rust and thin-set mortar

 

You can use it on materials like wood, metal and concrete – although this is not a heavy duty saw so use it for lighter tasks. Also note the shallow cut depth at 3/4 of an inch

 

Dremel Ultra Saw vs Saw Max Comparison

You can check out the similarities and differences of the Dremel Saws in this guide

 

Dremel Ultra Saw Accessories

Most people just buy the blades and guides for the Ultra Saw.

 

Dremel Ultra Saw Arbor Size

The arbor is designed to hold 3.5 to 4 inch diameter blades and wheels.

 

Dremel Ultra Saw Attachments

Most people just buy the blades and guides for the Ultra Saw.

 

Best Dremel Ultra Alternative

There’s a few other small hand held circular saws on the market like the Rockwell, the GENESIS and the WORX saws.

 

Dremel Ultra Saw Blades, Replacement Blades and Blade Size

You can get an Ultra Saw Blade Kit – Dremel US700 Ultra-Saw 6-Piece Cutting Wheel Kit (on Amazon).

 

What Is The Dremel Ultra Saw Cutting Depth?

3/4 inches

 

Is the Dremel Ultra Saw Cordless?

No, it’s a corded hand held circular saw.

 

Dremel Ultra Saw Case

There is an Ultra Saw kit that comes with a case

 

Is the Dremel Ultra Saw For Cutting Metal?

Yes, softer and lighter metals.

 

Is The Dremel Ultra Saw For Cutting Concrete?

Not really. You can use it to lightly surface grind concrete though.

 

Is The Dremel Ultra Saw For Cutting Tile?

You can cut tile, but only thin tile, and it’s more for short, light cuts.

 

Dremel Ultra Saw Dust Port Adapter And Dust Port Collecter

We could not find a suitable dust port adapter or collector for the Ultra Saw

 

Is The Dremel Ultra Saw For Drywall?

Yes you can use it for drywall, but keep in mind it’s cutting depth.

 

Can You Get A Dremel Ultra Saw Diamond Blade?

Yes, Dremel does the Dremel US540-01 Ultra-Saw 3.5-Inch Tile Diamond Blade (on Amazon).

 

Can You Get A Dremel Ultra Saw Guide?

You can get a Dremel mitre guide for the Saw max – Dremel Saw-Max SM840 Miter Cutting Guide (on Amazon).

 

Is The Dremel Ultra Saw For Flush Cuts?

You can use it for flush cuts but it isn’t ideal. It’s a bit awkward, and the cutting capacity is only 3/4 inch.

 

 

Friendly Disclaimers 

 

Tooljuice.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.

Amazon and the Amazon logo are trademarks of Amazon.com, Inc., or its affiliates.

Additionally, Tooljuice.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.

Leave a Comment