Best Nail Gun For Trim

The best nail gun for trim depends on the type of trim you are installing.

Some people seem to prefer a 15 or 16 gauge finish nailer – as finish nails provide the strongest fixing among nail guns for finishing activities.

Others prefer an 18 gauge brad nailer as they believe brad nails are a more flexible for different tasks overall.

You can quickly view the top rated list below if you are running short on time.

Otherwise, the full guide contains valuable information if you have a few minutes to browse over it.

 

(*Friendly Disclosure – links to retailers or brands on this page may include affiliate links, and we may receive a commission when you purchase through these links)

 

Top Rated Nail Gun & Nailer For Trim List

Best Nail Gun For Thick or Heavy Trim – Hitachi NT65MA4 1-1/4 Inch to 2-1/2 Inch 15-Gauge Angled Finish Nailer with Air Duster (on Amazon)

Best Nail Gun For Medium Trim – WEN 61720 3/4-Inch to 2-Inch 18-Gauge Brad Nailer (on Amazon)

Best Nail Gun For Very Thin or Delicate Trim – Hitachi NP35A 1-3/8″ 23-Gauge Pin Nailer (on Amazon)

 

Best Nail Gun & Nailer For Trim: Reviews

 

Hitachi NT65MA4 1-1/4 Inch to 2-1/2 Inch 15-Gauge Angled Finish Nailer with Air Duster

View On Amazon

What makes this finish nailer good for trim?

  • Designed for installing trim like –  crown and base moldings, window and door casings, chair rails, cabinets, exterior trim and staircases.
  • Comes in two models – a 15 gauge, and a 16 gauge model. Both shoot up to 2.5 inch long nails – provides strong fixing for all trim
  • Very affordable compared to other finish nailers on the market
  • Will work with a smaller/cheaper pancake type air compressor
  • Angle magazine – allows you to get into tight spaces and awkward angles around joints and where a straight magazine might get in the way
  • Fairly lightweight at 4.2 lbs

 

What improvements could there be for this nailer?

  • No belt clip for hooking to your belt for extended use
  • Doesn’t come with oil or lubricant – you’ll have to get your own (although oil is fairly cheap)

 

What other extras might you need with this nailer?

15 Gauge Nails 2 inch length – Senco A302000 15-Gauge by 2-Inch Bright Basic Finish Nail (on Amazon)

15 Gauge Nails 2.5 inch length – Senco A302509 15 Gauge by 2-1/2-Inch Electro Galvanized Finish Nail (on Amazon)

A Pancake Air Compressor –PORTER CABLE 6 Gallon Pancake Compressor Kit (on Amazon)

 

Where can you check out this nailer?

View the Hitachi NT65MA4 on Amazon

 

 

WEN 61720 3/4-Inch to 2-Inch 18-Gauge Brad Nailer

What makes this brad nailer good for trim?

  • Designed to be “Ideal For Trim Work and Light Assembly”
  • Is so cheap, that even if you only use it once, it will pay for itself
  • Fires 18 gauge brad nails, 3/4 to 2 inches in length. Versatile for both medium trim, and other finishing activities
  • Extremely lightweight – only 3 pounds
  • Works with a cheap pancake air compressor

 

What improvements could there be for this nailer?

  • More of a DIY nailer than a heavy duty production nail gun – while the gun is put together well, it could be more ‘solid’ in terms of construction
  • Not as many of the nail settings of a more expensive brad nail gun

 

What other extras might you need with this nailer?

Brad Nail Variety Pack #1 – Senco A209909 18-Gauge-by-1-2-Inch Electro Galvanized Variety Pack Brads (on Amazon)

Brad Nail Variety Pack #2 – Senco A209809 18-Gauge-by-5/8-Inch to 1-1/4-Inch Electro Galvanized Variety Pack Brads (on Amazon)

Pancake Air Compressor –PORTER CABLE 6 Gallon Pancake Compressor Kit (on Amazon)

 

Where can you check out this nailer?

View the WEN 61720 on Amazon

 

 

Hitachi NP35A 1-3/8″ 23-Gauge Pin Nailer

What makes this pin nailer good for trim?

  • Designed to be a small nailer for “trim work, molding, cabinetry details, paneling, glazed bead, assembling picture frames”
  • Good for delicate trim and if you don’t want to fill holes with putty
  • Shoots 5/8″, 3/4″, 1″, 1-3/16″ and 1-3/8″ length 23 gauge pin nails
  • Array of settings for nail drive depth
  • Value for money for the performance and range of features the tool provides

 

What improvements could there be for this nailer?

  • Struggles to drive nails more than 1 inch deep on harder materials like hardwood – consider a brad or finish nailer if this is an issue
  • Not a production pinner…more for DIY

 

What other extras might you need with this nailer?

Assorted Pin Nails – GREX P6/MP-3 23 Gauge Multi-Pack Headless Pins (on Amazon)

Pancake Air Compressor –PORTER CABLE 6 Gallon Pancake Compressor Kit (on Amazon)

 

Where can you check out this nailer?

View the Hitachi NP35A on Amazon

 

 

Best Nail Gun & Nailer For Trim: Buyer’s Guide & FAQ

What Is Trim?

Trim can be a number of materials including most commonly drywall, timber, aluminium or MDF.

Trim is a decorative or finish piece used to conceal edges and joints.

Common places where trims are installed are:

Floor and wall joints

Wall and ceiling joints

Windows

Doors

 

Other names for trim are baseboards, crown molding, beading, and chair and picture rails.

 

What Is A Nail Gun?

A nail gun is a tool used to fire nails of different gauges and lengths into materials to fix them to other materials.

 

What Types Of Nail Guns Are There For Installing Trim?

Finish Nailers – 15 or 16 Gauge nails up to 2.5 inches long. Thickest nails and biggest holes to putty up

Used to install thickest and heaviest trim. Thick finish nails provide the strongest fixing. Largest nail holes of the three nails.

 

Brad Nailers – 18 Gauge nails up to 2.5 inches long. In terms of size, these nails are between the finish and pin nails

Used to install medium thickness trim. Brad nails will give you a fixing that is stronger than a pin nail, but not as strong as a finish nail. Sometimes headless nails.

 

Pin Nailer – 23 Gauge nails up to 2 inches long. Mostly headless nails

Used to install very thin, light and delicate trim. Small pin nails will not split thin trim – and are usually headless so you don’t see the nail head in the hole

Can also get micro pin nails which are about 30% thinner in thickness than normal pin nails

 

How Are Nail Guns Used to Install Trim?

Pretty simple – they shoot nails of different sizes into different types of trim.

Depending on the size of the nail, the nail hole may be covered with putty after.

 

Bits & Accessories For Trim Nailers

Nails

If pneumatic – air compressor and air hose

If cordless – battery and charger

Oil/lubricant

 

How To Choose A Nail Gun For Trim

Choose a 15 or 16 gauge finish nailer for…

Thick and heavy trim

Trim that has to hang and hasn’t got the floor to support it

If you need a nail gun for other finish type activities where you want a strong fixing

 

Choose an 18 gauge brad nailer for…

Medium thickness and mid weight trim

If you want a flexible nailer than you can use for other finishing type activities

If you want nail holes you might not have to worry about filling

 

Choose a 23 gauge for…

Very thin or delicate trim you might split with a finish or brad nailer

Very small holes you won’t have to cover

Headless nails

 

Features To Look For In A Trim Nail Gun

Read our guides for useful information on features in each type of nail gun:

Finish Nailers

Brad Nailers

Pin Nailers

 

How To Use A Nail Gun

Refer to the above guides.

 

Best Nail Gun & Nailer For Trim: Resources

1. http://hitachipowertools.com/

2. http://www.wenproducts.com/

 

 

Friendly Disclaimers 

 

Tooljuice.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.

Amazon and the Amazon logo are trademarks of Amazon.com, Inc., or its affiliates.

Additionally, Tooljuice.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.

Leave a Comment