Best 23 Gauge Pin Nailer

This is a short and to-the-point guide on the best 23 gauge pin nailer.

Most pin nailers are made as 23 gauge because that is the gauge (diameter) of the standard pin nails they shoot.

Pin nail guns are part of the family of nail guns that are most commonly used for finishing type activities – along with brad nailers and finish nailers.

Below we have listed the best 23ga pin nailer, along with nails and compressors you might use with the gun.

Let’s jump into it …

 

(*Friendly Disclosure – links to retailers or brands on this page may include affiliate links, and we may receive a commission when you purchase through these links)

 

Top Rated 23 Gauge Pin Nailer List

Best 23 Gauge Pin Nailer – Hitachi NP35A 1-3/8″ 23-Gauge Pin Nailer (on Amazon)

 

Best 23 Gauge Pin Nailer: Reviews

 

Hitachi NP35A 1-3/8″ 23-Gauge Pin Nailer

View On Amazon

What’s Good About This Pin Nailer?

  • Good value for money with what is included in the set
  • Designed for trim work, molding, cabinetry details, paneling, glazed bead, assembling picture frames – anywhere where you want fine nails and small nail holes
  • Can shoot a variety of pin nail lengths – 5/8″, 3/4″, 1″, 1-3/16″ and 1-3/8″ inches
  • Nail depth adjustment settings
  • Reload indicator to show you when magazine is getting empty
  • Can remove nose plate to clear nail jams
  • Operates under 65-100 PSI
  • Nail magazine capacity of 100 pins
  • Weighs only 2lbs
  • 5 year limited warranty
  • Comes with comes with a blow molded plastic case for transport and storage, safety glasses, no-mar tips, and a 3mm hex bar wrench.

 

What Are Some Potential Improvements?

  • Lacks power – really only good for driving pins of 1 inch or less into soft-moderately hard surfaces. Not for driving 1+ inch pin nails into hardwoods

 

What Else Might I Need With This Pin Nailer?

Assorted Size Pin Nails – GREX P6/MP-3 23 Gauge Multi-Pack Headless Pins: 3,000 per box (on Amazon)

1 3/8 Inch Pin Nails – GREX P6/35L 23 Gauge 1-3/8-Inch Length Headless Pins: 10,000 per box (on Amazon)

Pancake Air Compressor –PORTER CABLE 6 Gallon Pancake Compressor Kit (on Amazon)

 

Where To Check Out This Pin Nailer?

View the Hitachi NP35A 1-3/8″ 23-Gauge Pin Nailer on Amazon

 

Best 23 Gauge Pin Nailer: Buyer’s Guide & FAQ

What Is A 23 Gauge Pin Nailer?

A 23 gauge pin nailer is a nail gun that shoots nails which are 23 gauge and fit the profile of a pin nail.

’23 gauge’ is a way to describe the size/thickness, and length of the pin nails the gun shoots.

Pin nail length is usually somewhere between 3/8, to 1 – 3/8 inches long).

A pin nailer fits into the range of nail guns that are used for finishing type activities, along with finish nailers (15 & 16 gauge) and brad nailers (18 gauge).

Most of these guns are powered by air compressors, however there are some cordless (battery operated) and

On a scale, the nails could be described as the following:

15 Gauge Finish Nails – thickest and strongest fixing…usually around 0.0720 inches, or 1.829mm thick

16 Gauge Finish Nails – usually around 0.067 inches , or 1.70 mm thick

18 Gauge Brad Nails – usually around 0.0475 inches, or 1.207mm thick

23 Gauge Pin Nails – thinnest and weakest fixing…usually around 0.025 inches in diameter/thickness

 

So, the lower the number, the thicker the nail and stronger the fixing.

 

What Is A 23 Gauge Pin Nailer Used For?

23 Gauge pin nails are the smallest and weakest in terms of strength, size and profile – when compared to brad nails and finish nails.

They aren’t as thick, round, long and don’t have the head of a 15 or 16 gauge finish nail. Some brad nails are headless like pin nails, but are usually longer (up to 2 inches long) and stronger.

The advantage of a pin nail, is that because they are small and headless, the nails holes don’t need to be filled with putty in some instances as they are small and there is no head exposed.

23 gauge Pin nails are best used for very lightweight trims and molding, and for delicate material or fine wood that a brad or finish nail might split.

For baseboards, crown moldings, stairs, materials without ground support, and heavier materials – use brad and finish nails for fixings.

 

23 Gauge Pin Nailer Bits & Accessories

23 Gauge Pin Nails – there are standard pin nails, and micro pin nails. Make sure you check which brand and type of pin nails your pinner takes

Air Compressor – a pancake compressor is usually OK for a brad nailer

Air hose with connection to attach to the gun

 

How To Choose a 23 Gauge Pin Nailer

Refer to the pin nailer guide.

 

Features To Look For In A 23 Gauge Pin Nailer

Refer to the pin nailer guide.

 

Best 23 Gauge Pin Nailer: Resources

1. http://www.hitachipowertools.com/

 

 

Friendly Disclaimers 

 

Tooljuice.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.

Amazon and the Amazon logo are trademarks of Amazon.com, Inc., or its affiliates.

Additionally, Tooljuice.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.

Leave a Comment